This professional grade amplifier features a dB signal-to-noise ratio with 0. The XPA is one quarter the size of comparable amplifiers, conserving rack space and weighing only 2. The Extron exclusive, high efficiency design generates very little heat and allows the amplifier to be convection cooled. With an auto power-down feature that automatically places the amplifier into standby after 25 minutes of inactivity, it consumes just 10 watts when idle and less than 1 watt in standby mode. The XPA is housed in a compact 1U, half rack width enclosure.
|Published (Last):||6 November 2010|
|PDF File Size:||10.85 Mb|
|ePub File Size:||1.5 Mb|
|Price:||Free* [*Free Regsitration Required]|
The hybrid shall provide two RJ connectors for connection to a telephone line and telephone set. The hybrid shall include a balanced line-level input and a balanced line-level output to pass audio to and from the audio conferencing device.
The input and output shall each have a selectable mute accessed via serial command, custom software, or contact closure. The input and output shall use three-pin Phoenix connectors. The hybrid shall have telephone line echo cancellation with a tail time of no less than 31ms. The unit shall have a digital network bus to receive system control. Up to sixteen units can be linked to add up to 16 telephone lines to the audio conferencing system. It shall have selectable auto answer and auto disconnect.
Additional settings shall be enabled through configuration software. The hybrid shall be able to store 10 speed dial numbers. The presence of transmit and receive audio and clipped audio signals, as well as on and off status, shall be indicated by LEDs on the front panel of the unit. The unit shall have the ability to meter transmit and receive audio. The unit shall be set up and operated with intuitive software that allows complete configuration of the system. Additional control shall be handled via custom control software, RS protocol with communications speeds up to 57, baud , or contact closure.
The hybrid shall use a single rack space and an internal VAC auto-adjusting power supply.
Clearone XAP 800 Manuals
Each input shall also be able to reference any output or any of four global reference buses for echo cancellation. The unit shall have four internal and four global automatic microphone mixers, each with fully adjustable parameters. The microphone mixer shall use PA adaptive, adaptive ambient, chairman override, first mic priority, last mic mode, number of open mics, and look-ahead gating. Any input can be routed to any output or multiple outputs. Signal processing shall be provided by eight assignable processing blocks, each with 15 programmable filters, delay, and compression. The processing blocks shall include such filters as high pass, low pass, all pass, low shelving, high shelving, notch, parametric EQ, CD horn, Bessel crossover, Butterworth crossover, and Linkwitz-Riley crossover. Filter setup shall be real-time.
ClearOne XAP 800 Professional Conferencing